bright works, inc. metal polishing and buffing supplies logo

Polishing and Buffing Kits



aluminum buffing kit
Aluminum and
Brass Buffing Kits

Bring that old aluminum and brass back to a brilliant mirror finish yourself and save.
Kit shown above has 6" wheels. Also available are 8" and 10" kits. Kits include; two Spiral sewn buffs, two Loose sewn buffs, one small bar of Tripoli and one small bar of Color buffing compound and complete instructions. All buffing wheels in these kits are 1/2" wide.
6" Kit 39.95. 8" Kit $52.95, 10" Kit $59.95
stainless steel buffing kit
Stainless Steel
Buffing Kits

Now you can restore the luster to your
old stainless steel trim in no time.

Kit shown above has 6" wheels. Also available are 8" and 10" kits. Kits include; two Spiral sewn buffs, two Loose sewn buffs, one small bar of Stainless and one small bar of Color buffing compound and complete instructions. All buffing wheels in these kits are 1/2" wide.
6" Kit 39.95. 8" Kit $52.95, 10" Kit $59.95
Please specify kit type, size 6", 8", or 10" and hole size needed, 1/2", 5/8", 3/4", 7/8", 1", or 1-1/4".
       Quantity      
show cart after each purchase. Do not show cart after each purchase.

combo buffing kit, aluminum, stainless
Combo Buffing Kits
For Aluminum, Brass
And Stainless Steel

This kit allows you to do most any type of metal. Plus we have included two
Cloth & Sisal buffs for removing
deeper scratches and imperfections.

Kit shown above has 6" wheels. Kits include; four Spiral sewn buffs, two Cloth & Sisal buffs, two Loose sewn buffs, one small bar each of Stainless, Tripoli, and Color buffing compounds, and complete instructions. All buffing wheels in these kits are 1/2" wide, except the Cloth & Sisal that are 3/8" wide. 6" combo kit, $74.95.   8" combo kit $94.95.   10" combo kit $110.95.

Please specify kit type, size 6", 8", or 10" and hole size needed, 1/2", 5/8", 3/4", 7/8", 1", or 1-1/4".
       Quantity      
show cart after each purchase. Do not show cart after each purchase.

aluminum buffing kit, four inch buffs stainless steel buffing kit, four inch buffs
4" Buffing Wheel Kits

For use with your air or electric drill or a bench type motor.

Kits include; two Spiral sewn buffs, one #MN-3 wheel adapter, one
small bar of the coloring compound and either one small bar of Tripoli or
Stainless compound depending on aluminum or stainless kit and complete instructions.
All buffing wheels in these kits are 1/2" wide and provided with 1/2" hole size only. 4" kits are $27.95.

   Quantity  
show cart after each purchase. Do not show cart after each purchase.


abrasive roll kit
Abrasive
Roll Kits

Get all the details for a show quality job. For use with your 1/4" & 1/8" collet die grinders.
abrasive roll kit example
Reaching all the tight areas is what really turns heads. Our detailed polishing kit will quickly
remove heavy casting, pits and deep scratches. Leaving your work with a smooth uniform finish
that is ready for buffing. Kit comes complete as shown with: four packs of CR-1 (1/4" x 1") rolls
in grits of 120, 180, 240, and 320; four packs of CR-3 (1/2" x 1") rolls in grits of 120, 180, 240, and
320; one 4 oz. tube of Tallow Grease, and one M-8 roll mandrel. With instructions #KT-125. $34.95 ea.

Also available, same as above, although for use with 1/8" collet hand grinders. The #M-8 mandrel is replaced with an 1/8" shank mandrel #M-7 and the CR-3 rolls are replaced with our CR-2 (3/8"x 1") rolls. #KT-126, Roll Kit for 1/8" grinders. $33.95 ea.
   Quantity  
show cart after each purchase. Do not show cart after each purchase.

Abrasive "set up" Polishing Wheels
For Fast and Smooth Sanding

These wheels are used for removing any where from rough casting, pits,
and heavy too fine scratches, on any type of metal, leaving your work
with a smooth uniform finish, that is ready for your buffing procedures.

This type of abrasive wheel has been used for decades in many polishing and plating shops and to this day are still one of the least expensive ways to do your abrasive (polishing) work. Not to mention their unique cutting action that is very fast and uniform, while at the same time, do not gouge the surface of the metal being polished.
Polishing wheels are most often used on your bench type motor with wheel sizes from 4" diameter and larger. Although may be used on smaller hand held power tools for wheels sizes of 2" through 4" diameter. Areas needing polishing (sanding) less than 2" diameter are best suited for tapered goblet buffs and less than 1" diameter use abrasive rolls.
abrasive wheels kit
Abrasive "Set-Up" Polishing Wheel Kits
To get you started quickly we have put
together a polishing wheel kit including everything you will need to start polishing.

We have included everything you will need to get started on removing those deep pits
and scratches. Kit includes; two of our 6" x 1" Wide Spiral Sewn Buffs; one, pint can of
cold glue; one, Pumice brick; one, 7 oz. tube of Tallow Grease; one, emery grit of 180
and one of 240 grit, and complete instructions to get you going fast. #KT-175, $72.95
We also have the same kit available with 8" wheels. #KT-178, $85.95.

Set-Up Polishing Wheels perform best at the following RPM’s. Do not exceed maximums.
6" work best at 1800 RPM's, maximum 3600 RPM's. 8" work best at 1800 RPM's, maximum 2000 RPM's.

Please select kit size 6" or 8" and hole size needed, 1/2", 5/8", 3/4", 7/8", 1", or 1-1/4".
       Quantity      
show cart after each purchase. Do not show cart after each purchase.



Home / Shop Polishing and Buffing kits
For use with your bench grinder or buffer and also a 1/4" collet hand grinders.

Everything you need for polishing and buffing on many types of metal such as;
aluminum, brass, copper, die cast, steel, stainless steel and cast iron. You can save
a lot on your total chrome plating cost by doing your own polishing and buffing prior to plating.
Plus, this kit includes the products to get you into the tight areas on your detailed polishing projects.

Your motor should be a minimum, 1/4 HP for the 6" kit, 1/2 HP for the 8" kit.
Motor RPM's should be 1725 to 3600 on the 6" and 1725 to 1800 on the 8" kit.
All the kits have the same quantity of products, just the wheel size is different for the 6" and 8" kits.

Kits include, ten Spiral buffs, two Loose sewn, two Sisal, one small bar each of Tripoli, Stainless & color
compound, everything for making your abrasive wheels, Cold Glue, Tallow Grease, Cleaning brick,
abrasive emery in 120, 180, & 240 grits, abrasive rolls in two sizes 1/4" & 1/2" and four grits of
120, 180, 240 & 320 for a total of 120 rolls, one 1/4" roll mandel, four TY-2 mini yellow treated
buffs and one  1/4" shank mandrel, four 1/2" x 1" felt cones and 1/4" shank mandrel.

Please specify 6, or 8, kit and hole size needed, 1/2", 5/8", 3/4", 7/8", 1", or 1-1/4".
Home-Shop Kit with 6" wheels #KT-128, $229.95.     Home-Shop Kit with 8" wheels #KT-828, $269.95
       Quantity      
show cart after each purchase. Do not show cart after each purchase.


Polishing and
Buffing Kits



Bright Works, Inc. Phone 651-429-4439.
Web site © Copyright, 1996, 2001, 2003, 2005, 2011. 2014.  All Rights Reserved