bright works, inc. metal polishing and buffing supplies logo

Abrasive Rolls Get All The Details



abrasive rolls, mandrels and example

Get into all the tight areas fast, for a detailed show quality job.
Our abrasive rolls are, industrial quality resin bond, for longer wear and faster cutting action,
lasting much longer than standard rolls. These rolls work great for removing any where from
heavy casting to light scratches on any type of metal. Also used for porting heads.

Rolls are 1" long and in packs of ten. 1/4" diameter $3.49. 3/8" diameter $3.99. 1/2" diameter $4.29.

For the best results use with Tallow Grease abrasive lubrication listed below.
Tallow Grease extends the life of your rolls by reducing heat, dust and harsh cutting,
while providing a smoother more uniform finish, making it much easier to buff out.

Please specify rolls size and grit below, available in 1/4", 3/8" & 1/2" diameter x 1" long & grits of 80, 120, 180, 240, or 320.


Abrasive Roll mandrels for 1" long rolls above. Available for 1/4" and 1/8" shank sizes.


Warning: above mandrels are NOT for use with longer rolls listed below (CR-4 or CR-5).


long abrasive rolls and mandrels

1/2" x 1-1/2" long Tapered & Drum Rolls Max. RPM 22,000.
Rolls are in packs of 5. Drum rolls $3.49 pack, Tapered Rolls $4.29 pack

Please specify Drum or Tapered rolls and abrasive grit, 80, 120, 180, 240, or 320.


Abrasive Roll mandrels for 1-1/2" long rolls above. Available for 1/4" shank size.


Tallow Grease abrasive lubrication

Extends the life of your rolls by reducing heat, dust and harsh cutting,
while providing a smoother more uniform finish, making it much easier to buff out.

For use with "set up" wheels and abrasive rolls. Available in 4 oz. $3.49, 7 oz. 5.99 or 22 oz. $9.99.



abrasive roll kit
Abrasive
Roll Kits

Get all the details for a show quality job. For use with your 1/4" & 1/8" collet die grinders.
abrasive roll kit example
Reaching all the tight areas is what really turns heads. Our detailed polishing kit will quickly
remove heavy casting, pits and deep scratches. Leaving your work with a smooth uniform finish
that is ready for buffing. Kit comes complete as shown with: four packs of CR-1 (1/4" x 1") rolls
in grits of 120, 180, 240, and 320; four packs of CR-3 (1/2" x 1") rolls in grits of 120, 180, 240, and
320; one 4 oz. tube of Tallow Grease, and one M-8 roll mandrel. With instructions #KT-125. $34.95 ea.

Also available, same as above, although for use with 1/8" collet hand grinders. The #M-8 mandrel is replaced with an 1/8" shank mandrel #M-7 and the CR-3 rolls are replaced with our CR-2 (3/8"x 1") rolls. #KT-126, Roll Kit for 1/8" grinders. $33.95 ea.





Detailing
Abrasive Rolls



[Home Page]   [About Us & Contact Us]   [Shipping Charges]


Bright Works, Inc. Phone 651-429-4439.
Web site © Copyright, 1996, 2001, 2003, 2005, 2011. 2014.  All Rights Reserved